Model : 250 Mode |
Ion |
ph |
mV |
Ranges |
1.00 x10-9 to 9.99 x 109 |
-2.000 to 20.000 |
?800.0 |
Resolution |
1, 2, 3 significant digits |
0.001/0.01/0.1 |
0.1/1 |
Relative Accuracy |
?0.17n% |
?.002 |
?.1 |
Temperature Measurement |
-5.0 to 105¡É; relative accuracy, ?.3¡É |
Temperature Compensation |
Manual
Automatic, -5.0 to 105¡É |
Slope Control |
Automatic 90 to 105%, Manual 80 to 110% |
Environmental Conditions
|
15¡Éto 40¡É, 0 to 90% Relative Humidity |
Conductivity Range |
0 to 300,000µS |
Relative Accuracy |
0.5% of reading |
Salinity Ranges |
Autoranging, 0.01 to 70ppt NaCl equivalent salinity
Autoranging, 0.01 to 42ppt practical salinity |
Resistivity |
30ohm•cm to 1, 10 or 20megohm•cm (at cell constants of
10, 1, 0.5cm-1 respectively). Autoranging units; readout in ohm•cm, kilohm•cm, or megohm•cm. Fixed units: kilohm•cm |
Total Dissolved Solids |
0.005 to 1.5x105 mg/L (at 0.5 solids factor, depending on cell constant) |
Temp Coefficient |
Software configurable; Off or On 0 to 4%/°C |
Power Requirements |
115V 50/60Hz (Additional voltages available) |
Model : 225 |
Ranges |
1.00 x 10-9 to 9.99 x 109 |
-2.000 to 20.000 |
?800.0 |
Resolution
significant digits |
1, 2 or 3 |
0.1/0.01/0.001 |
1/0.1 |
Accuracy |
?0.17n% |
?.002 |
?0.1 |
Temperature
Compensation |
Automatic or manual, from -5¡Éto 105¡É |
Slope Control |
Automatic, 90 to 105%, manual, 80 to 110% |
Environmental
Conditions |
15?to 40°C, 0 to 90% (noncondensing) Relative Humidity |
Power
Requirements |
115V 50/60Hz (Additional voltages available) |
Meter with kit includes |
Meter, power supply, high performance glass-body pH/ATC "3-in-1" electrode, electrode arm and operation manual. |
The Meter only includes |
Meter, power supply, electrode arm and operation manual. |
Model : 215 |
Range |
|
-2.000 to 20.000 |
?800.0 |
Resolution |
|
0.001/0.01/0.1 |
0.1/1 |
Accuracy |
|
?.002 |
?.1 |
Temperature
Compensation |
Automatic & manual:-5 to 105¡É |
Slope Control |
Automatic, 90 to 105%
Manual, 80 to 110% |
Environmental
Conditions |
15 to 40¡É, humidity from 0 to 90% (noncondensing) |
Power Requirements |
115V 50/60Hz (Additional voltages available) |
Meter with kit includes |
Meter, power supply, high performance glass-body pH/ATC
combination electrode, electrode arm and operation manual. |
Meter only includes: |
Meter, power supply, electrode arm and operation manual |
Model : 220 |
Range |
|
-2.000 to 20.000 |
?800.0 |
Resolution |
|
0.1/0.01/0.001 |
1/0.1 |
Accuracy |
|
?.002 |
?.1 |
Automatic Temperature
Compensation |
Automatic or manual from -5 to 105¡É. |
Slope Control |
Automatic 90 to 105% Manual, 80 to 110% |
Environmental
Conditions |
15?to 40¡É, 0-90% RH |
Power Requirements |
115V 50/60Hz (Additional voltages available) |
Meter with kit includes: |
Meter, power supply, high performance glass-bodypH/ATC "3-in-1" electrode, electrode arm and operation manual. |
Meter only includes |
Meter, power supply, electrode arm and operation manual. |
Conductivity
Range |
0.01 to 3 x 105 µS/cm (depending on cell constant) |
Resolution |
1, 2 or 3 significant figures |
Accuracy |
?0.5% of reading |
NaCl Equivalent Salinity |
Autoranging, 0.01 to 70ppt |
Practical Salinity |
Autoranging, 0.01 to 42ppt |
Resistivity |
Autoranging, 30 ohm•cm to 20 Megohm•cm (depending on cell constant) |
Temperature Correction |
Off or On, 0 to 4%/°C |
Excitation Frequency |
225 Hz |
Replatinizing Circuit |
2.5V, open circuit; 7.5mA, short circuit |